Industrial Gearboxes Manufacturer

Bevel Helical Gear Boxes & Helical Gear Boxes
AGNEE H series helical parallel shaft and bevel helical right angle drive industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market.

The modular design and construction of the Series H offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production while maintaining the highest standard of component integrity.

Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. Please feel free to discuss your requirement and we shall be pleased to make suitable suggestions.

Product Specification:
Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the Series H range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.

• Unit Sizes: 80, 90, 100, 112, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630
• Transmission ratio: 1.2 - 438
• Input Power: 0.61 KW to 5,000 kW
• Torque: Up to 117,000 Nm
• Gear Ratios: Up to 130:1

Features & Benefits of Bevel Helical Gearboxes
AGNEE Series H Bevel Helical Gearbox takes advantage of our many years of accumulated design expertise together with the use of high quality materials and components, and has the following features & benefits:-

• Profile ground helical gears.
• High level of surface finish for quiet running.
• Units can be offered in horizontal or vertical mounting positions
• All units are also available with hollow bore for output shaft mounting.
• Output bores can be connected by shrink disc.

Worm Gear Boxes
The AGNEE Worm Speed Reducers have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. Agnee Transmission focused on manufacturing and wholesale supplying of Industrial Gearboxes. The Worm Shaft is made of Alloy Steel, duly hardened, tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is affected by means of standard polypropylene or metal fans. Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. They are available in:

• Vast range of Models suit every individual's requirement
• Some Models like C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-stock or on short notice
• Center Distances from 40 mm to 400 mm
• In Single or Double Stage Reductions
• Ratios from 5:1 to 4900:1
• Also made as per customer's specifications, Drawing, requirements
• Overhauling of Old Gear Boxes also undertaken, Early delivery schedules